Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680 °F [360 °C] or in Steam at 750 °F [400 °C]

Importancia y uso:

5.1 This test method is primarily used as an acceptance test for products of zirconium, hafnium, and their alloys. This standard has been widely used in the development of new alloys, heat treating practices, and for evaluation of welding techniques.

5.2 Specimens are normally tested after careful etching and rinsing. Specimens with as-manufactured surfaces may also be tested without further surface removal.

5.3 When tubing with a second material clad on the inner surface is to be tested, the inner cladding shall be removed prior to the test.

Subcomité:

B10.02

Referida por:

B0351_B0351M-13R23, B0352_B0352M-17R21, B0811-13R22E01, B0353-12R22E01

Volúmen:

02.04

Número ICS:

77.060 (Corrosion of metals), 77.120.99 (Other non-ferrous metals and their alloys)

Palabras clave:

mass gain; steam corrosion; water corrosion;