Standard Practice for Load Handling When Using an Exoskeleton

Importancia y uso:

5.1 This practice guides the user through selection of loads and example load handling tests and procedures for use in evaluating exoskeletons worn by the user. The practice is designed to allow replication of loads and tests. Fig. 1 shows a flow chart for performing load handling test methods. Initially, the load handling test is requested by a manufacturer, user/potential user, etc. as in box 1. The environment in which the test is to be performed is documented using Practice F3427 as in box 2. This practice is shown in box 3 where documentation of the load and test results occurs. Evaluation of results occurs after the test has been completed as in box 4.

This practice is shown in the bold outlined box #3.

5.2 It is expected that this practice provides test guidance for many, although not all, load handling activities using exoskeletons that may occur. However, the test method provides examples to be used directly or as guidance for developing additional load artifacts and load handling tests.

Subcomité:

F48.03

Referida por:

F3578-22, F3749-25, F3323-24, F3584-22, F3747-25, F3528-21, F3612-24, F3582-22, F3580-24, F3748-25, F3581-22, F3517-21, F3523-21, F3688-25, F3583-22

Volúmen:

15.13

Número ICS:

53.020.99 (Other lifting equipment)

Palabras clave:

environmental conditions; exoskeleton; load; load handling;