Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties

Importancia y uso:

4.1 If the desired mechanical properties are as described in 5.1.1 for material identified as Classes P-1 through P-7, or in 5.1.2 for material identified as Classes Q-1 through Q-7, the strength level desired can be based on hardness or the equivalent tensile or yield strength as shown in Tables 1-4. If the desired mechanical properties are as set forth in 5.1.3 for material identified as Classes R-1 through R-6, the strength level is based on yield strength as shown in Tables 5 and 6.

4.2 The user, after determining the mechanical property requirements of the critical section (that carrying the greatest stress) of the part, should select the composition or compositions from Tables 1-6 that fulfills these requirements and is most suitable for processing.

Subcomité:

A01.15

Referida por:

A0322-13R18E01, A0108-24, A0576-23

Volúmen:

01.05

Número ICS:

77.140.60 (Steel bars and rods)

Palabras clave:

steel bars;