Standard Test Method for Determining the Ultimate Strength of Deep Corrugated Structural Plate Bolted Longitudinal Lapped Seams

Importancia y uso:

5.1 This test method provides a procedure for testing to determine the ultimate strength in compression of bolted longitudinal seams with lapped connections in deep corrugated structural plate. This test method is applicable to variable length longitudinal seams with circumferential seams between adjacent plates.

Note 1: The testing is intended for bolted longitudinal seams in plate with the following corrugation sizes in Practice A796/A796M: 15 in. by 5.5. in. (Practice A796/A796M Tables 34 and 35), 20 in. by 9.5 in. (Practice A796/A796M Tables 36 and 37), and 16 in. by 6 in. (Practice A796/A796M Table 38 and 39).

5.2 The maximum load achieved in this testing, along with normalization procedures in this test method, are used to establish values for ultimate strength of bolted structural plate longitudinal seams for design in accordance with Practice A796/A796M.

Subcomité:

A05.17

Volúmen:

01.06

Número ICS:

77.140.50 (Flat steel products and semi-products)

Palabras clave:

bolted seam; circumferential seam; corrugated steel pipe; corrugated steel plate; deep corrugated structural plate; drainage pipe; lapped seam; long span; longitudinal seam; seam strength; steel structural plate;