Tienda en línea para normas ASTM
Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable
Norma
A1008/A1008M
Versión
21a
Estatus
Active
Clasificación
Specification
Importancia y uso
N/A
Subcomité
A01.19
Alcance
1.1 This specification covers cold-rolled, carbon, structural, high-strength low-alloy, high-strength low-alloy with improved formability, required hardness, full hard, solution hardened, and bake hardenable steel sheet, in coils and cut lengths.
1.2 Cold rolled steel sheet is available in the designations as listed in 4.1.
1.3 This specification does not apply to steel strip as described in Specification A109/A109M.
1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Referida por
F1178-11R22, F1018-22, F2432-12R18, A1092-15R20, C1423-21, F1267-18R23, F1244-08R23, F0782-19, F0826-22, F2435-22, F0823-22, A0794_A0794M-18, F0821_F0821M-23, D0609-17R22, C0754-20, C0361M-22, F0824-22, F0822-22, F2562_F2562M-15R19, F2408-16R23, A0917-08R20, F0825-22, C0361-22, A0879_A0879M-22, A0568_A0568M-19A, A0749_A0749M-14R21, A0513_A0513M-20A, A0599_A0599M-07R17, A0568_A0568M-19A
Volúmen
01.03
Páginas
12
Número ICS
77.140.01 (Iron and steel products in general)
Fecha aprobación
2021-11-01
Sustituida por
N/A
Fecha sustitución
N/A
Fecha cancelación
N/A
Palabras clave
bake hardenable steel; bake hardening index; carbon steel sheet; cold-rolled steel sheet; commercial steel; deep drawing steel; drawing steel; extra deep drawing steel; full hard steel; high-strength low-alloy steel; high-strength low-alloy steel with improved formability; required hardness steel; solution hardened steel; special forming steel; steel sheet; structural steel;
